T-Grip is a heavy-duty, T-shaped digital thermometer perfect for use in meat processing combines, fryers, composting, and wherever you need extra-long reach. Its sealed housing provides full waterproof protection in the harshest factory environments.
Extra Large Top Display
0.62-inch digital display on the top of the thermometer for easy reading at a glance.
Auto-Rotating Backlit Display
Backlit for low light, display automatically rotates 180 degrees so it is always right-side up.
Max/Min Temps
Cycle through recorded Max and Min temperatures with the press of a button.
Improved Accuracy
Sub-degree accuracy to ±0.9°F (±0.5°C) over much of its extended range of –58 to 572°F (–50 to 300°C).
Fully Waterproof
IP67 means it is secured against ingress from dust and water, even submersion.
T-Grip is ready for the most demanding industrial use, with its hardened plastic housing, molded-in seals, and a reinforced 0.24-inch long-stem stainless steel probe with reduced tip.
Each T-Grip is individually calibrated at 32°F (0°C) and 212°F (100°C) and comes with a 2-point NIST-traceable calibration certificate verifying its accuracy to national standards. A two-year warranty against defects and a new internal trim function making it easy to maintain performance over time.
Choose from 5-inch, 12-inch, 24-inch, or our new extra-long 36-inch probe for big batches.
| Specifications |
| Measuring Range |
-58 to 572°F (-50 to 300°C) |
| Accuracy |
±0.9 (±0.5°C) between 14 to 212°F (-10 to 100°C),
±4.5°F (±2.5°C) between 392 to 572°F (200 to 300°C);
otherwise ±2.7°F (±1.5°C) |
| Display Resolution |
0.1° over full range |
| Response Time |
About 8 seconds
|
| IP Rating |
IP67 |
| Operating Range |
32 to 122°F (0 to 50°C) |
| Probe - TX-3005 |
5 L x 0.2 inch dia. reduces to 0.14 inches dia. (127 L x 5.0 mm dia. reduces to 3.5 mm dia.) |
| Probe - TX-3010 |
12 L x 0.2 inch dia. reduces to 0.14 Inches dia. (305 L x 5.0 mm dia. reduces to 3.5 mm dia.) |
| Probe - TX-3015 |
24 L × 0.24 Inch dia. reduces to 0.14 inches dia. (610 L x 6.0 mm dia. reduces to 3.5 mm dia.) |
| Probe - TX-3020 |
36 L x 0.24 inch dia. reduces to 0.14 inches dia. (914 L x 6.0 mm dia. reduces to 3.5 mm dia.) |
| Auto-Off |
After 10 minutes - can be disabled |
| Backlight |
10 seconds |
| Battery |
CR2032 (3V) Lithium coin cell (included) x 1, 4,000 hours |
| Display |
0.70 H x 1.8 W inches (18 H x 47 W mm); Digits: 0.62 H inches (16 H mm) |
| Product Size |
Main Body: 1.14 H x 3.6 W × 1.6 D inches (29 H x 91 W x 42 D mm) |
| Certificate |
Includes NIST-traceable Calibration Certificate |
